Price Calculator
Skoda Karoq
The price of this journey would be
0€
Trip start fee of 0.44€ is included in the price calculation.
If you use all the trips included in your CityBee subscription plan before it expires, you can purchase a new plan at any time.
Bee Chill – we’ve got your back! If you happen to have an accident and accidentally damage the vehicle, don’t stress – we’ve got you covered. Just be sure to notify us right away, and we’ll take care of the rest.
The BeeChill is a financial responsibility fee is applied to all ‘Pay as You Go’ trips, and it’s already included in the price of trip packages or trips made with a subscription plan. You can see the fee in the app before you start your trip.
This fee is designed to cover any damage to the car that may occur due to an accident where you’re at fault, except for certain situations, such as failure to report the incident to us, causing the accident while under the influence of alcohol, violating traffic regulations, etc.
For more details on your liability and any exceptions, be sure to check out our Terms of Service.
In that case, we recommend purchasing a pre-paid trip package. Before starting your trip, you can choose whether you want to use a subscription plan trip or buy a pre-paid package. You can select from available packages or create your own.
Please note that this service is provided in Lithuania and Estonia.
Every single CityBee electric vehicle has a different mileage which also heavily depends on the current season (i.e. the mileage is increased when the temperature is +15°C rather than when it’s -10°C):
Volkswagen e-Crafter: warm Summer – 130 km, cold winter – <85 km;
Peugeot e-2008: warm summer in the city ~300 km, out of the city ~220 km; cold winter in the city ~200 km, out of the city ~160 km.
Fiat 500e: warm summer in the city – 240km, out of the city – 180km, cold winter in the city – 190km, out of the city – 140km
For exact mileage, please take a look at the vehicle’s computer screen after having driven it for at least 5 km.
When using CityBee, you don’t have to pay for fuel yourself – you only pay for the time and kilometers you drive.
Refueling is easy!
Go to any of our partner Circle K gas stations. Open the CityBee app and start the refueling. Follow the simple instructions, fill up, and hit the road!
If the fuel is below 1/4 of the tank, you’ll receive a €2 discount for topping up.
Step by Step refueling guide
Check the Reservation map in the app to see nearby fuel stations. Tap a station for details and directions, then drive there.
When you arrive, tap the notification or open the CityBee app, go to Reservation, and select Refuel.
The app shows available pumps. Pick your pump, activate it, and wait for confirmation.
When it says, “Ready to fuel,” pick up the nozzle and start fueling. Return the nozzle when finished. The app will update the fueling status automatically.
If you decide not to refuel, you can cancel in two ways:
Manual cancel: Pick up the nozzle and immediately return it – the refueling is canceled.
Automatic cancel: If the nozzle is never picked up, the app will automatically cancel the refueling after 2 minutes of inactivity.
In rare cases, you may need to use the fuel card inside the car. This happens if the pump doesn’t work via the app or if you’re refueling outside the Baltic States. The CityBee app shows the PIN code and fuel type under your active reservation.
This fee applies to all Pay As You Go trips and is already included in the price of our trip packages or trips made with a subscription plan!
Please note that electric cars can be found in Lithuania and Estonia.
Lithuania:
Make sure the car is unlocked.
Open Charger socket cover on the car which is next to the driver’s door (in the case of the VW e-Crafter electric van) or behind the rear door (in the case of light electric vehicles). If the cover does not open, click “Unlock” on the car key.
In case of charging the vehicle at the “IgnitisON” or “ElintaCharge” fast charging station:
Use the right-most charging wire (“Type 2”) that is already connected to the charging station.
Attention: Wire configurations may vary in some charging stations, so you can only find a Type 2 or “CCS” type wire.
Take the car keys and find the charging token attached (there are two tokens: one for “IgnitisON” and one for “ElintaCharge”).
Approach the charging station and scan the charging token.
Choose the charging slot (“Pasirinkite jungtį”) by pressing a button next to the shown option.
Press the button “Pradėti” to start charging.
In case of charging the vehicle at a 2-slot “ElintaCharge” station:
Take the charging wire from under the middle seat of a CityBee car:
• In the case of the VW e-Crafter electric van – under the front center seat.
• In the case of a passenger car – to the spare wheel space in the trunk.
2. Put one side of the charger wire in the car electric socket and another side into the charging station.
3. Scan the RFID token with “ElintaCharge” written on it.
4. The word “Charging” should start lightning, which means the vehicle is being charged.
Check the car’s charging socket (the green light should be lightning; if there is an orange light or no light at all, it means that the car is not being charged) and the information screen behind the steering wheel (it should indicate that the car is being charged with an indicated time left until fully charged).
Estonia:
Make sure the car is unlocked
Open the charger socket cover, which is located behind the rear door. If the cover does not open, click “Unlock” on the car key.
Charging the vehicle in ‘Eleport’ charging station:
Take the ‘Eleport’ charging card from the sun visor and tap it on the screen
Select either ‘CCS’ or ‘Type 2’ charging option and connect it to the car
Press ”start charging” to start the charging process
To make sure the car is charging, check the charging port to see, if there is a green light.
Signing up for CityBee is free. And no membership fees are applied.
The price of this journey would be
0€
Trip start fee of 0.44€ is included in the price calculation.
